Промышленный коммутатор IES-3080

Артикул: 0003011
Описание

Промышленный 8-портовый управляемый коммутатор 8x 10/100TX (RJ-45)
Диапазон рабочих температур -40 ~70
Тип питания Triple 12~48VDC
Технология резервирования соединения и время восстановления O-Ring <10ms 

Технические характеристики:

Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX 
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control 
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency : 7 μs 
Switching bandwidth : 5.2Gbps
Max. Number of Available VLANs : 4096 
IGMP multicast groups : 1024 
Port rate limiting : User Define
Security Feature Enable/disable ports, MAC based port security 
Port based network access control (802.1x) 
VLAN (802.1q ) to segregate and secure network traffic 
Supports Q-in-Q VLAN for performance & security to expand the VLAN space 
Radius centralized password management 
SNMPV1/V2c/V3 encrypted authentication and access security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic 
VLAN (802.1Q) with VLAN tagging and GVRP supported 
IGMP Snooping for multicast filtering 
Port configuration, status, statistics, monitoring, security 
SNTP for synchronizing of clocks over network 
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Network Redundancy O-Ring
O-RSTP
Open-Ring
STP
Warning / Monitoring System Relay output for fault event alarming 
Syslog server / client to record and view events 
Include SMTP for event warning notification via email 
Event selection support
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1
LED Indicators
Power Indicator Green : Power LED x 3
Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link / Act Amber for 100Mbps indicator
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Power Consumption (Typ.) 5 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W)x106.1(D)x144.3(H) mm
Weight (g) 710g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 324,409
Промышленный коммутатор IES-3080